Contractor Profile 1
Contractor Profile 2
Contractor Profile 3
Manitoba Mill Upgrade
Bridges & Culverts
Calendar of Events
Past Issues Archive
Join our Listserve
Search Our Site
September 2006 - The
Logging and Sawmilling Journal
cONTRACTOR PROFILE 3
AN OPTIMISTIC FUTURE
The industry may be going
through some tough times
right now, but there are some
young loggers out there,
like BC’s Travis Englund, who
remain optimistic about the
future of logging, and their
place in that future.
By Jim Stirling
If Travis Englund is any
indication, the log
harvesting sector retains
some allure for attracting a
new generation of young
The forest industry is
in keen competition for
operators and mechanics—
let alone the myriad of
abilities that are needed to
become a successful logging
contractor working in British
Columbia. But with six years experience
under his belt—the last couple out on his
own—Englund is gung-ho about his chosen
profession and upbeat about its future.
“I always wanted to run my own
company,” says the 27-year-old logger. “And
be my own boss. It’s been tough on us as
a family to do at times, but the benefits far
outweigh the negatives.”
Englund operates Jarosa Contracting Ltd,
based in Quesnel, BC. Jarosa is a compound
from the Christian names of his first three
children: James, Rosa and Sara. Little Emma
came along after the company was formed.
Englund gives great credit to his wife,
Maria, for her support and for taking care
of the home front and a young family while
Englund works loggers’ hours. Actually, the
hours weren’t too bad earlier this summer
during a visit to the operation; his machine
was being single shifted close to home. It was in
transition from roadbuilding/excavator work mode
back to dangle head processor.
Travis Englund (bottom) of Jarosa Contracting
operates with two machines—two New
Holland 20-ton carriers fitted with 7000
series LogMax processing heads, which can
take on large wood quite nicely. Jarosa was
recently working in a helicopter logging show
where the New Holland/LogMax combo had
little difficulty handling 30-inch diameter fir.
Jarosa has two machines: two New Holland
20-ton carriers fitted with 7000 series LogMax
processing heads for logging. And Englund has been
happy with both ends of the system.
He was quick to learn the value of good working
relationships with key equipment suppliers. Douglas
Lake Equipment is the Kobelco/New Holland dealer
in Quesnel. “They’ve been very helpful to me right
from the beginning,” says Englund.
The LogMax heads were sold and serviced
through Pro-Max in Kamloops, BC. “Those guys are
really interested in the jobs the heads are doing.
If you have a problem, you can talk with them on
the phone and they can walk you through it. If that
doesn’t work, they’re right up there themselves to
deal with it,” credits Englund.
He had one of his contract
processors working for West
Fraser Timber, east of Quesnel.
The other was working in a
helicopter logging show of
Cattermole Timber’s near Hope,
The operator there was Jordan Cook, 23, a buddy of Englund’s since they both worked together at the McDonald’s in Quesnel.
Englund says he and Cook are in daily communication, and things were working out well with the two-sided operation. “He’ll let
me know if there are any problems he can’t handle.” Englund adds the New Holland and 7000 LogMax combo had little difficulty
handling the big old 30-inch diameter fir encountered at the Hope show.
East of Quesnel, Englund’s other machine was working the bottom end of a high lead block, predominantly in spruce. It’s the
pine forests of the BC Interior that garner all the headlines in the wake of Canada’s worst mountain pine beetle epidemic. But some
of the same factors that helped spawn that devastation—wildfire fighting and mild winter temperatures during key times of the
beetles’ life cycle—are also causing severe spruce bark beetle infestations.
Englund was processing short logs up to 16 feet, five inches, and other required sorts at roadside included pulling peeler material.
Englund believes as log harvesting conditions and circumstances change in the bush, they will do so to the benefit of the younger
loggers. “We’re not set in our ways,” explains Englund. “Here’s the machine, here’s the wood, get it down.”
Englund says he read a recent survey of logging contractors and how they viewed their jobs. He says he was surprised to learn
less than half the respondents would recommend logging as a career to their children. “I’m damn proud of what I do. Maybe you
shouldn’t be doing it if you can’t recommend it to your children,” suggests Englund. He’s the first in his immediate family to look to
the bush to put food on the table, although Quesnel is a forestry dependent city and his dad works there in the sawmilling sector.
Englund says he doesn’t waste too much time fretting about forest industry politics, including the proposed softwood lumber deal
outcome with the US. They are matters out of his control, he notes. Instead, he adopts a more pragmatic approach.
“I feel there will be options,” he explains. All that beetle wood out there has to be harvested and roads have to be built to access
it. “And the older guys are leaving the business,” he notes.
In time, the new guard may not be working exclusively with feedstock for commodity lumber production. Englund points to the
announcement last year by Ainsworth Lumber Ltd, of its intention to invest about $400 million to build two oriented strand board
(OSB) plants based on mountain pine beetle-killed timber. One of those is planned for the Quesnel area, pretty much in Englund’s
And TallOil Canada Inc has plans to build four pellet plants at an estimated cost of $30 million each near Vanderhoof, Fraser
Lake and two in the Quesnel area. A possible fifth plant could follow in the Williams Lake area. What all that translates to are some
of the possible options Englund was referring to. In the meantime, Jarosa Contracting will do what needs to be done. “We’ll move a
machine wherever it needs to go to work,” says Englund. “We’re flexible.” Spoken like a veteran logger.